This post was created in partnership with Baby Lock.
Thanks for supporting the brands that help us share fun content with you.
Want to see all my favorite machines, tools, and accessories? Check out my Baby Lock affiliate page.
We’re finally settled back into the studio after an amazing QuiltCon and I’m finally getting around to sharing details about our booth. Designing our booth for in-person events is one of my favorite things to do. I love obsessing over tiny details and I’m always down for a good theme. Maybe it’s the graphic designer in me that finds joy when every sign in the booth is in the same font. One of the most ask questions at QuiltCon was if I would share a tutorial about some of our booth details, specially the fabric paper chain and bows so I’ve put together a tutorial for both!
While we used the chains and bows to decorate our booth, they would be just as cute as party decor or to decorate any room in your house!
At QuiltCon, we displayed our project panels with the large bows and I just love the whimsical touch it added to them.
Fabric Paper Chains
Supplies
Cotton fabric, cut into 9″ x 3″ pieces
Pellon Ultra Firm Non-Woven Stabilizer, cut into a 1″ x 8″ strip for each individual chain
Thread
Rotary cutter + ruler
Pinked egde rotary blade
Iron
Stitch tagging gun
Step 1
Use a rotary cutter with a pinked edge blade to cut fabric into 9″ x 3″ pieces. Each piece will make one individual chain link.
Step 2
Place a 1″ x 8″ ultra-thick interfacing piece in the center of a 9″ x 3″ piece of fabric, wrong side up. Fold the left side over and press. Fold the right side over and press.
Step 3
Use a wide zig zag stitch to sew through the center of the fabric, through all layers. Back stitch at each end and trim threads.
You have completed one chain link! Repeat steps 1-3 to sew as many links as you wish.
Step 4
When you are ready to hang your “paper” chain, use a stitch tagging gun to secure each link. Alternatively, you can hand or machine sew each chain together if you plan to keep your chain assembled.
If using the stitch tagging gun, we found it easiest to push the needle through the fabric (not the interfacing) and hold it against the base of the needle while clicking the trigger. Without this step, we found it to be a bit finicky and the tags wouldn’t catch the fabric.
Large Fabric Bows
Supplies
Cotton fabric cut to the following sizes:
Large: (1) 18” x 35”, (1) 15” x 48”, (1) 2” x 6”
Medium: (1) 12” x 24”, (1) 10” x 32”, (1) 1.5” x 5.5”
Batting (cotton or polyester), 9″ x 35″ for each large bow and 6″ x 24″ for each medium bow
Thread
Rotary cutter + ruler
Iron
Step 1
Take the largest piece of fabric (18″ x 35 for the large bow or the 12″ x 24″ piece for the medium bow) and fold it in half lengthwise, wrong sides together. Align the long edge of the batting with the long raw edge of the fabric. Sew the raw edge with a 1/2″ seam allowance, stitching through all layers, and back stitching at the beginning and end.
Step 2
Flip the batting filled tube right side out and press. Bring the short, raw edges together and sew, back stitching at the beginning and end.
Step 3
Take the medium piece of fabric (15” x 48” for the large bow or 10” x 32” for the medium bow) and fold it in half lengthwise, wrong sides together. Use a marking tool to draw a gentle curve along each short end, as pictured above. Trim along the lines that were just drawn. Sew the tube closed, leaving a 2″ opening in the center.
Step 4
Turn the bow tails right sides out and press.
Step 5
Fold the tiny fabric piece in half, short, wrong sides together. Sew the raw edges. Flip right side out.
To assemble the bow thread the tail and bow through the sewn loop. Fluff the bow a bit to make it look full and you’re done!
We hung the bows on Command Hooks using zip ties to secure them to the hooks.
What are you going to use your oversized bows and fabric chains for? Please tag #sarahhearts. We love seeing all the amazing things you create!